Three wire welded wire mesh machine fully automatic use for garden
parameters of three wires fence mesh clamp welding machine
| Item | Parameters |
| Wire diameter | 6+5+6mm/8+6+8mm |
| Mesh width | 1-2.5m |
| Mesh length | 1-3m |
| Mesh size | 50*200mm |
| Welding number | 16 (customized) |
| Welding time | 30-50times/min |
| Voltage | 380V-440V 50HZ |
| Welding transformer | 160KVA*8 |
| Overall dimension | 14000*3200*2100mm |
| Weigth | 6.5 T |
machine working step:
Feeding system: the weft and warp wire both are pre-cut wires. The
worker put wires into store holder, then the store holder put the
wires into weld dies automatically. It is ready to welding after
two weft wires and one warp wire were put.
Welding system: Both the cent-control and welding time are
controlled by PLC program system. Upper and lower electrode is
controled by transformer to weld up and down. This welding is more
accurate and firm.
Pulling system: the mesh pulling system is control by servo motor,
which makes the mesh size more standard and accurate.
Control system: control cabinet adopt touch screen operate system,
which dispaly in both
Chinese and English, so the operation is very simple.
machine advantage:
1. The line wire and the weft wire are pre-straightened and
pre-cut.
2. The longitude wires can be adjustable and cross wire distance
can be adjustable according to input the data what you want. The
greatest advantage is that you can adjust the distance weft wire at
random on the same piece of wire mesh sheet.
3. The finished product fence panel is smooth; the error of
opposite angle line is small.
